|
|
|
Frontier Approved Products |
  |
 |
 OnSite™
Equipment Mountings
(Return to Top of Page) |
|
Enginuity Model |
Description |
Technical Document |
| WR-5UI2 |
Wall rack, 5U capacity, for 19-inch equipment |
 |
| WR-10U |
Wall rack, 10U capacity, for 19-inch equipment |
|
| SPL-4H |
Side plate with two (2) adjustable, split slack
reels |
|
| CG-5 |
Package of five (5) cable guides for wall rack |
|
|
|
|
Network Channel Terminating Equipment (NCTE) & Plug-Ins
(Return to Top
of Page) |
|
Enginuity Model |
Description |
Technical Document |
| A90-915000 |
Analog CSU, 2-wire, 600-ohm |
|
|
|
|
Test
Equipment
(Return to Top
of Page) |
|
Enginuity Model |
Description |
Technical Document |
| No Test Equipment is available at this
time. |
|
|
|
Service Interface Panels (SIP) & Couplers
(Return to Top
of Page) |
|
Enginuity Model |
Description |
Technical Document |
| SIP-600 |
6 Position Interface Panel w/(6) Blanks |
|
| SIP-1200 |
12 Position Interface Panel w/(12) Blanks |
|
| SIP-1200SOL-PKG |
12 Position Interface Panel w/(8) CAT5e Couplers and (4) SC
Couplers Installed |
| SIP-1206 |
12 Position Interface Panel w/(6) CAT5e Couplers |
| SIP-1206BNC-PKG |
12 Position Interface Panel w/(6) BNC Couplers, (6) Blanks
and (1) D-Ring |
| SIP-1206SC-PKG |
12 Position Interface Panel w/(6) SC Couplers, (6) Blanks,
(1) D-Ring and (1) CPE Cable Tray |
| SIP-1212 |
12 Position Interface Panel w/(12) CAT5e Couplers |
| SIP-1212BNC-PKG |
12 Position Interface Panel w/(12) BNC Couplers and (1)
D-Ring |
| SIP-1212SC-PKG |
12 Position Interface Panel w/(12) SC Couplers, (1) D-Ring
and (1) CPE Cable Tray |
| SIP-2400 |
24 Position Interface Panel w/(24) Blanks |
|
| SIP-2412 |
24 Position Interface Panel w/(12) CAT5e Couplers |
| SIP-2412BNC-PKG |
24 Position Interface Panel w/(12) BNC Couplers, (12)
Blanks, (2) D-Rings and (1) CPE Cable Tray |
| SIP-2412SC-PKG |
24 Position Interface Panel w/(12) SC Couplers, (12) Blanks,
(2) D-Rings and (1) CPE Cable Tray |
| SIP-2424BNC-PKG |
24 Position Interface Panel w/(24) BNC Couplers, (2) D-Rings
and (1) CPE Cable Tray |
| SIP-2424SC-PKG |
24 Position Interface Panel w/(24) SC Couplers, (2) D-Rings
and (1) CPE Cable Tray |
| SIP-3600 |
36 Position Interface Panel w/(36) Blanks |
|
| SIP-3600XL-PKG |
36 Position Interface Panel w/(8) CPL-5E-1, (6) CPL-BNC-1 &
(4) CPL-SC-1 Couplers Installed |
| DRNG-1 |
Optional “D” Ring for SIP-1200/2400 |
|
| SIPT-1 |
Optional “CPE” Cable Tray for SIP-1200/2400 |
|
| CPL-5E-1 |
CAT5e Coupler |
|
| JCK-5E-KRO-1 |
CAT5e Krone Coupler |
|
| CPL-6S-1 |
CAT6e Coupler |
|
| CPL-BNC-1 |
BNC/BNC Coupler |
|
| CPL-LC-1 |
LC/LC Fiber Coupler |
|
| CPL-SC-1 |
SC/SC Fiber Coupler |
|
| CPL-SC-APC-1 |
SC/SC APC Fiber Coupler |
|
| CPL-F81-1 |
F-81/F-81 Coax Coupler |
|
| CBL-GRD-1 |
Cable guard for SIP-3600 |
|
|
|
Service
Interface Protection Panels (SIPP) and Modules
(Return to Top
of Page) |
|
Enginuity Model |
Description |
Technical Document |
| MIP-4SCI2 |
Keystone coupler module with four (4) SC fiber couplers
installed |
|
| SIPP-600 |
Six (6) slot SIPP chassis for Service Protection Modules (SPM),
supporting T1, DS3, and Ethernet services. |
|
SIPP-600C
|
Six (6) slot SIPP chassis for Service Protection Modules (SPM),
supporting T1, DS3, and Ethernet services. Includes removable
cover for front equipment connections. |
|
| SIPP-1800 |
Eighteen (18) slot SIPP chassis for Service Protection
Modules (SPM), supporting T1, DS3, and Ethernet services. |
|
SPM-100-R
|
Service Protection Module for Ethernet 10/100 Base-T (dry
loop) with Cat5E/RJ45 connectors. Equipment connector on rear,
Line connector on front. |
|
SPM-T1-RM
|
Service Protection Module for T1/E1 (dry loop) with RJ48C
connectors. Equipment connector on rear, Line and Monitor
connectors on front. |
|
SPM-DS3-RM
|
Service Protection Module for DS3 (dry loop) with BNC coax
connectors. Equipment connectors on rear, Line and Monitor
connectors on front. |
|
| SPM-xx |
SPM Installation Guide |
|
| MIP-4I2 |
Keystone coupler module with four (4) blank inserts
installed |
|
| MIP-4SC-FOC |
Keystone coupler module with four (4) SC-FOC fiber couplers
installed |
|
| BP1-1 |
Blank cover for empty module slot in SIPP chassis |
|
| SIPP-3600XLWD3-PKG |
SIPP-3600 w/ (8) SPM-100-R, (3) SPM-DS3-RM, (1)
MIP-4SC-FOC |
|
|
|
Jumpers
& Accessories
(Return to Top
of Page) |
|
Enginuity Model |
Description |
Technical Document |
| CTC-239S |
239-type cut-through card |
|
| 800-5E-8M8M003 |
Cable CAT5e/CAT6, 8-pin modular, 3FT |
|
| 800-5E-8M8M006 |
Cable CAT5e/CAT6, 8-pin modular, 6FT |
|
| 800-5E-8M8M010 |
Cable CAT5e/CAT6, 8-pin modular, 10FT |
|
| 820-SM-SCSC002 |
Cable Fiber Jumper SM SC/SC, 2M |
|
| 820-SM-SCSC003 |
Cable Fiber Jumper SM SC/SC, 3M |
|
| 820-MM-LCLC002 |
Cable Fiber Jumper MM LC/LC, 2M |
|
| |
|
|
